Spark plasma sintering of UO2 nanopowders: Pressure,heating rate and current effects

We analysed with different methods the densification of UO₂ nanopowders in SPS under constant heating rate (CHR) and isothermal sintering conditions. The apparent activation energy of densification in SPS (75 kJ/mol with CHR method) is significantly smaller than in conventional sintering. It is shown that this is likely not an effect of the applied current. We also observed a threshold stress at 64 MPa for the transition from pressure-insensitive sintering (stress exponent n≈0) to pressure-assisted sintering, suggesting that the contribution of the capillary stresses in such nanopowders is comparable with the typical stress applied in SPS.     

石油降解菌ZS1对典型抗生素毒害作用的应激响应机制

为了解抗生素对石油降解菌的生态效应及微生物对典型抗生素毒害作用的应激响应机制，通过开展不同浓度典型抗生素对高效石油降解菌铜绿假单胞菌（ZS1）的毒性试验，研究了菌体细胞在3种不同种类抗生素（土霉素、红霉素、磺胺嘧啶）作用下的生长及毒理指标。结果表明，3种抗生素对ZS1有不同的抑菌效果，其中土霉素对ZS1活性的抑制程度最强，抑制率随着土霉素浓度的增大而明显上升，有显著的浓度-效应关系。研究了ZS1抗氧化酶（过氧化氢酶、过氧化物酶、超氧化物歧化酶）对抗生素的响应机制，结果表明ZS1受到污染时会通过产生抗氧化酶抵抗外界污染并维持细胞功能。     

Local scour at offshore windfarm monopile foundations: A review

In this article, current research findings of local scour at offshore windfarm monopile foundations are presented. The scour mechanisms and scour depth prediction formulas under different hydrodynamic conditions are summarized, including the current-only condition, wave-only condition, combined wave-current condition, and complex dynamic condition. Furthermore, this article analyzes the influencing factors on the basis of classical equations for predicting the equilibrium scour depth under specific conditions. The weakness of existing researches and future prospects are also discussed. It is suggested that future research shall focus on physical experiments under unsteady tidal currents or other complex loadings. The computational fluid dynamics-discrete element method and artificial intelligence technique are suggested being adopted to study the scour at offshore windfarm foundations.     

Braking behaviours of C/C–SiC mated with iron/copper-based PM in dry,wet and salt fog conditions

C/C–SiC composites have enormous potential as a new generation of brake materials. It is worth studying the friction and wear behaviours of these materials in special environments to ensure the safe and effective braking of trains in practical applications. In this study, the braking behaviours and wear mechanisms of C/C–SiC mating with iron/copper-based PM in dry, wet and salt fog conditions are compared in detail. The results show that the coefficient of friction (COF) in the wet condition is reduced by 14.13% compared with that under the dry condition. The COF value of the first braking under salt fog condition is increased by 12.27% and 30.75% compared to the dry and wet conditions, respectively. Additionally, the tail warping phenomenon of the braking curve disappears in wet condition, which is attributed to the weak adhesion of friction interfaces and the lubrication of the water film. The main wear mechanisms of C/C–SiC mating with iron/copper-based PM under dry condition are adhesive, fatigue and oxidation wear. However, the dominant wear in wet condition is abrasive wear. The cooling and lubrication of water reduce the tendency of thermal stress, and weaken adhesive and fatigue wear. Furthermore, salt fog can accelerate the corrosion of alloy friction film, leading to the damage of friction film. Meanwhile, the third body particles formed in salt fog condition participate in the braking process. The wear mechanisms in salt fog condition are dominated by abrasive and delamination wear.     

面向分拣机器人的珍珠形状视觉检测方法

针对人工进行珍珠形状分拣效率低、精度不稳定等问题,提出基于机器视觉的珍珠形状检测方法;采用背光成像方式消除珍珠表面纹理和光泽的影响,对获取的珍珠图像进行同态滤波等预处理算法,提高图像对比度;为了解决相互接触珍珠影响珍珠轮廓提取的问题,采用分水岭算法对珍珠图像进行分割,得到了独立存在的珍珠个体,再通过连通域标记、质心算法对珍珠进行定位;根据国家标准对珍珠形状的规定,基于珍珠图像信息建立珍珠形状参数模型,对珍珠形状进行量化;实验结果表明,不同形状的珍珠样本的检测误差为0.63%,形状统计精度为100%,算法耗时24 ms;该方法可准确高效地对珍珠进行分拣分级,具有一定的实用价值。     

Foam-based cleaning of surfaces contaminated with mixtures of oil and soot

Liquid foams of intermediate stability have been shown to be very efficient in the cleaning of sensitive surfaces because of the synergy between imbibition and foam decay. While we quantified these mechanisms for contaminations with liquid oils in our previous work, we show here their extension to oils containing soot particles in an effort to simulate increasingly realistic contaminations. Using foams with a wide range of liquid fractions and with different stabilities, we show that the main cleaning mechanisms remain very similar, with the oil entraining the soot particles. However, we find much less efficient soot removal when the liquid channels of the foams are small enough to hinder efficient transport of the soot particles.     

Microstructure,mechanical properties,and fracture behaviour of Ti(C,N)-based cermets with a composite structure

Ti(C,N)-based cermets with a composite structure were designed to maintain the balance between strength and toughness. The cermets with the composite structure comprised coarse particles and the matrix, and the coarse particles included fine hard phases compounded in the matrix. A new hard phase grain with a four-layered structure was found. The composite structure of the cermet can contribute to high toughness, and the grain with the four-layered structure in the composite structure imparts high strength and toughness. As the granule size increases, the fracture toughness of the cermets increased, but the hardness and transverse rupture strength (TRS) showed the opposite trend. The toughening mechanisms of the cermet were crack branching, crack bridging, crack deflection, and formation of tear ridges.     

飞秒激光光斑轮廓的傅里叶描述子重建及特征提取

在利用飞秒激光对单晶硅材料进行微尺度烧蚀时,衍生的等离子体发光光斑中蕴含着大量的加工信息。如何有效提取光斑图像的几何特征信息,对研究飞秒激光烧蚀加工工艺过程具有重要意义。轮廓特征是描述激光光斑最重要的特征之一,本文着重分析了等离子体光斑轮廓特征与光斑运动规律间的关系及光斑运动情况分类方法。首先,考虑到光斑微弱的特性,对光斑图像进行增强处理。其次,采用链码方法提取光斑轮廓特征,并利用傅里叶描述子低频特性,选取少量的描述子重建光斑图像轮廓特征,减少了复杂的计算量,有效提高了光斑图像分类的速度与质量。最后,运用Hu不变矩特征证明傅里叶描述子用于提取激光光斑对轮廓特征的有效性。